1) Install Screens:
Insert each screen into each scoop opening from the underside of the
hood. Press the bottom tab of the screen between the inner and outer
layers of fiberglass in the bottom side of the scoop opening. Once the
bottom tab is firmly in place and pressed flush against the outer skin
of the scoop opening, press the top of the screen forward until it is
also flush with the outer skin at the top of the scoop.
2) Glue Screens in Place:
Place a small amount of glue on the top tab of each screen. Press the
glue through the screen, bonding the screen to the fiberglass on the top
side of the scoop.
Questions? You can reach our Tech
Department at 513-505-9971, M-F 9:00am - 6:00pm EDT. We can also be
reached by email at: firstname.lastname@example.org.